Skip to main content
High density power conversion

Scalable, redundant power delivery
for autonomous decision making while on orbit

Density icon

高電力密度

High efficiency icon

高効率

Low noise icon

低ノイズの技術

Internal redundancy icon

Internal redundancy

Optimizing performance and redundancy for AI and machine learning applications

Optimizing performance and redundancy for AI and machine learning applications

優れた接続性

低軌道・中軌道衛星に搭載されているデジタル機器は飛躍的進歩を遂げており、特にそこで使われる高性能ネットワークASICには高電力密度、高効率で低ノイズの電力供給ネットワーク(PDN)が必須です。またこれらの配電ソリューションはTID(トータルドーズ)やSEE(シングルイベント効果)への耐性も備えなくてはなりません。

Ideal power delivery

Vicor radiation-tolerant power modules enable the ideal Power Delivery Network (PDN) for today’s LEO and MEO satellites, providing high efficiency, high density, low-noise voltage conversion to power advanced network communication ASICs and processors to provide on orbit decision-making.

大電流供給に最適な高性能電源モジュール

高電力密度

By delivering high-density power with minimal footprint, real-time processing is possible while maintaining reliable space operations.

高効率

Vicor Factorized Power Architecture allows for voltage transformation to occur as close to the processor as possible, significantly reducing distribution losses to best serve onboard processors with demanding low-voltage, high-current requirements.

スケーラビリティ

Modular power delivery networks adapt to varying satellite sizes and mission profiles. This compact power design allows for seamless integration across different spacecraft and supports long-term sustainability, optimizing performance as space technology evolves.

低ノイズ

Low noise zero-current and zero-voltage switching reduce electrical interference. Minimizing unwanted signals enhances signal integrity, allowing AI-driven satellites to process data accurately and quickly.

Illustrated representation of a Vicor power module positioned on a board

フォルトトレランスのための電力変換部二重化

Single event functional interrupt (SEFI) immunity is achieved using a redundant architecture in each module, where two identical and parallel powertrains with fault-tolerant control ICs are housed in a single, high-density module. If one power path is disrupted, its protection circuits force a power-off-reset. The second seamlessly maintains full operation until the reset interval is complete and both powertrains are operating in parallel again. This redundant design strengthens long-term stability, enabling AI-driven satellites to function autonomously and efficiently in space.

Illustrated representation of a dual powertrain Vicor module

理想的なPoL電源システム:
Vicorのファクトライズド・パワー・アーキテクチャ(FPA)

ファクトライズド・パワー・アーキテクチャ (FPA) とは、従来の単体のDC-DCコンバータを、機能別に電源モジュールに分解した構成です。電圧調整機能のモジュールであるPRMと変圧機能モジュールVTMです。電力変換のスイッチング方式と制御方式には、ゼロ電圧・ゼロ電流スイッチング技術を使っており、それぞれのモジュールで最適化されて、低ノイズ・低損失を実現しています。PRMとVTMの各コンポーネントは高電力密度・高効率・低ノイズの電源モジュールです。VTMは変圧の機能のみとすることで小型にできるため負荷の近くに置くことができます。大電流のアプリケーションで基板の配電損失を最小限に抑えることができます。

Illustrated representation of Vicor Factorized Power Architecture for Satellite

放射線耐性を高めた市販製品で完結するソリューション

Illustrated representation of a 100V LEO Satellite Power Delivery Network

Our radiation-tolerant COTS source-to-point-of-load power delivery simplifies design by integrating the full power chain, from high-voltage bus input to low-voltage conversion, enabling faster time to market, reduced system cost, and maximized board space with compact, flight-ready components.

BCM3423 SM-ChiP™

BCM3423 バスコンバータモジュール


絶縁 電圧変換比固定


入力電圧: 100V (94 – 105V, 120V transient)


出力電圧: 33V (31 – 35V)


出力電力: 400W 


Kファクター: 1/3


ピーク効率: 96%


33.5 x 23.1 x 7.4mm


26g


50krad, 35MeV•cm2/mg


Vicor PRM2919 SM-ChiP™

PRM2919 レギュレータ


非絶縁 レギュレータ


入力電圧: 33V (30 – 36V)


出力電圧: 25V (13.4 – 35V)


出力電力: 200W


出力電流: IOUT 7.69A


ピーク効率: 97.5%


29.2 x 19.0 x 7.4mm


18.2g


50krad, 35MeV•cm2/mg


Vicor VTM2919 SM-ChiP™, K factor 1/32

VTM2919 0.8V, 150A 電圧変換モジュール


絶縁 電圧変換比固定


入力電圧: 25V (13.4 – 35V)


出力電圧: 0.42 – 1.1V


出力電流: 150A


Kファクター: 1/32


ピーク効率: 94.3%


29.2 x 19.0 x 4.9mm


13.3g


50krad, 35MeV•cm2/mg


Vicor VTM2919 SM-ChiP K factor 1/8

VTM2919 3.3V, 50A 電圧変換モジュール


絶縁 電圧変換比固定


入力電圧: 25V (16 – 32V)


出力電圧: 2 – 3.8V


出力電流: 50A


Kファクター: 1/8


ピーク効率: 95.2%


29.2 x 19.0 x 5.5mm


11g


50krad, 35MeV•cm2/mg


Proven and trusted supplier

For over 40 years Vicor has designed and manufactured its innovative and award-winning power modules in the United States. Our fabrication facility in Andover, Massachusetts is vertically integrated, enabling us to have greater control of the entire manufacturing life-cycle process, ensuring quality and reducing the risk of supply chain interruptions. 

コンテンツ

高効率な電力供給システムについてもっと詳しく知りたい方は、下記フォームよりお問い合わせください。