VIPAC™ family
VIPAC™ Power System 50 – 900 Watt
The VIPAC family of power systems is a unique class of user-defined, modular power solutions that is easily configured using the Vicor PowerBench™ tools. It incorporates pre-assembled and tested front ends, Vicor Maxi, Mini and Micro series
Power System Designer
Quick product searchWatch demo video
Output
Min output:
Minimum output:
Nom output:
Nominal output:
Max output:
Maximum output:
Features and benefits
Features and benefits
Single, dual or triple outputs
Protective features: Inrush current limiting, transient protection, EMI filtering
Rugged low-profile coldplate
Heat-sink platforms available
Resources
Resources for the design engineer
Configuring in small spaces
Learn to break down rails into smaller increments to fit high-power, multi-rail requirements into nontraditional footprints like L-shapes or donuts
Meeting transient needs
Mitigate I²R losses and trace inductance by shifting to vertical power placement using advanced multi-phase modules and current multipliers
Powering high current loads
Explore solutions for delivering thousands of amps to demanding loads and evaluate constraints like connector pin scaling and cable sizing
- cURus – UL 60950-1, CSA 60950-1
- cTÜVus – 62368-1, UL 62368-1, CSA 62368-1
- CE Marked – Low Voltage Directive (2014/35/EU)
- CE Marked – Low Voltage Directive (2014/35/EU) and RoHS Recast Directive (2011/65/EU)
- CB Certificate – IEC 62368-1
For California residents see information regarding California Proposition 65
- VIPAC Power System Configuration "A"
PDF DXF - VIPAC Power System Configuration "B"
PDF DXF - VIPAC Power System Configuration "C"
PDF DXF - VIPAC Power System Configuration "D"
PDF DXF - VIPAC Power System Configuration "E"
PDF DXF - VIPAC Power System Configuration "F"
PDF DXF - VIPAC Power System Configuration "G"
PDF DXF
Promo Component
Get more documents, videos and case studies in the resource library for engineers
Related Products
Related Products
Legacy DC-DC converters supporting traditional designs
The DC-DC converter that established the “brick” standard
Highly flexible system of DC input, with as many as four user-definable outputs
Input filter module for VI-200/VI-J00
Output ripple attenuator for VI-200/VI-J00
Input filter module for Mini, Maxi, Micro
Output ripple attenuator module for VI-200/VI-J00 and Micro, Mini, Maxi series converters.
Active PFC module
Single-phase AC front-end system incorporating the FARM and the MiniHAM
AC input filter and rectifier for PFMs in a VIA package
Autoranging rectifier module for VI-200/VI-J00
Autoranging rectifier module for Mini, Maxi, Micro